Rear Lock Button: Installation

CAUTION: Make sure that the harness grommet is securely installed.
If not properly installed, this may cause leaks.

Install the switch request (lock).
Install the switch opener rear gate. Ref. to SECURITY AND LOCKS>REAR GATE OPENER BUTTON>INSTALLATION .
Install the garnish assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>ASSEMBLY .
Install the garnish assembly rear gate.
Tightening torque:

4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .