LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Power Seat System >> Removal >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Seat System: Removal: Notes

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • The load sensor of the occupant detection system is fixed to the cushion frame assembly. Never remove the load sensor from the cushion frame assembly. The following parts can be replaced as a single unit.
    • Cushion pad
    • Cushion cover
    • Occupant detection control module
    • Seat harness
  • When the cushion frame assembly of the passenger's seat is replaced, the occupant detection control module, seat harness and load sensor are assembled. When replacing the cushion frame assembly, do not touch the load sensor to avoid electrical damage.
  • When removing or replacing the seat, perform "Occupant Detection System Inspection" after installing the seat to check if the occupant detection system operates normally. Ref. to PRE-DELIVERY INSPECTION>PRE-DELIVERY INSPECTION (PDI) PROCEDURE>SHEET .
scientia non olet · About LEMON Manuals