Power Seat & Remote Control Mirror Control Module (Only With Seat Position Memory)

1. Prior to starting work, check the following precautions. Ref. to SEATS>GENERAL DESCRIPTION>CAUTION .
2. Raise the seat cushion by operating the switch.
3. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
4. Remove the driver's seat from the vehicle. Ref. to SEATS>FRONT SEAT>REMOVAL .
   NOTE: Move the front seat (driver's seat) to the following positions.

   • Slide: rearmost end
   • Reclining: most upright
   • Lifter: downmost end
   • Tilt: downmost end
5. Remove the power seat & remote control mirror Control Module.

1. Disconnect the connector.
2. Remove the nuts and remove the power seat & remote control mirror Control Module.

Courtesy of SUBARU OF AMERICA, INC.