LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Rear Gate Control Module: Installation

  1. Install the power rear gate control module (PRG control module).
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel - rear apron LH.
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .