| Brake Maintenance Mode |
Used when inspecting and repairing parts related to rear brake. |
Refer to PARKING BRAKE>PARKING BRAKE SYSTEM>OPERATION>BRAKE MAINTENANCE MODE
. |
| Reading of parameter: ECM to SSM |
Read VDC Control Module parameter data. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>MAINTENANCE MODE>VDCCM PARAMETER READING
. |
| Writing of parameter: SSM to ECM |
Write the parameter data to the VDC Control Module. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>MAINTENANCE MODE>VDCCM PARAMETER WRITING
. |
| Select Parameter |
Select and register parameters in the VDC Control Module. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>MAINTENANCE MODE>VDCCM PARAMETER SELECTION
. |
| Confirm on parameter |
Parameters registered in the VDC Control Module are displayed. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>MAINTENANCE MODE>VDCCM PARAMETER CHECK
. |