LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Brake Control (Diagnostics)) >> Inspection Mode >> Procedure >> VDC System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC System

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Subaru Select Monitor, perform the clear memory of [Brake Control]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
  2. Drive the vehicle at least ten minutes. (Reproduce nearly the same condition as occurred when the DTC was recorded.)
    NOTE:

    Make sure the vehicle is not dragged to one side under usual driving condition.