Diagnostics for Engine Starting Failure: Procedure
WARNING: This page is about a different variant/trim than selected.
- Check of the fuel amount
- CHECK IMMOBILIZER.
- Model without push button start Refer to IMMOBILIZER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
- Model with push button start Refer to KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
- Inspection of starter motor circuit Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>STARTER MOTOR CIRCUIT .
- Inspection of ECM power supply and ground line Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) .
- Inspection of ignition control system Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>IGNITION CONTROL SYSTEM .
- Inspection of fuel pump circuit Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>FUEL PUMP CIRCUIT .
- Inspection of fuel injector circuit Refer to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>FUEL INJECTOR CIRCUIT .