Data Monitor: List
| Item name | Contents | Standard | Note |
|---|---|---|---|
| +POWER B | Power supply voltage value Display range: 0.00 - 21.5 V | 10.5 - 16 V | - |
| + B | Power rear gate Control Module power supply voltage value Display range: 0.00 - 21.5 V | 10.5 - 16 V | - |
| IGN SW | Ignition switch status Display range: ON/OFF | ON: IGN ON OFF: IGN OFF |
- |
| Memory stop SW | Memorized height switch status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| D SW | Driver's seat switch status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| R/G inner SW | PRG inner switch status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| COURTESY SW | Courtesy switch status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| LATCH SW | Latch switch status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| SECTOR SW | Sector switch status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| TOUCH SENSOR R | Right side touch sensor status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| TOUCH SENSOR L | Left side touch sensor status Display range: ON/OFF | ON: When the switch is ON OFF: When the switch is OFF |
- |
| PRG MOTOR (OPEN) | Output status of rear gate motor open signal Display range: OPEN/OFF | OPEN: When rear gate is in open operation OFF: OFF | - |
| PRG MOTOR (CLOSE) | Output status of rear gate motor close signal Display range: CLOSE/OFF | CLOSE: When rear gate is in close operation OFF: OFF | - |
| CLOSER (OPEN) | Output status of power rear gate auto closer motor open signal Display range: OPEN/OFF | OPEN: When open signal is output OFF: OFF | - |
| CLOSER (CLOSE) | Output status of power rear gate auto closer motor close signal Display range: CLOSE/OFF | CLOSE: When close signal is output OFF: OFF | - |
| BUZZER | Buzzer output status Display range: ON/OFF | ON: When buzzer sounds OFF: When buzzer stops |
- |
| HAZARD | Hazard output status Display range: ON/OFF | ON: When hazard is ON OFF: When hazard is OFF |
- |
| Pulse-count | Drive unit count information Display range: 0 - 765 | - | - |
| Connection Continuing Flag | Display range: Continuation request flag exists/Continuation request flag does not exist | Continuation request flag exists: Continuation request flag does not exist: | - |
| PRG State | Rear gate status Display range: Full open/Door free/Suspending/Operating/Full close | Full open: Full open state Door free: Door-free state Suspending: Suspended state Operating: In operation Full close: Full closed state |
- |
| Idle Stop Cancel Flag | Auto Start Stop cancel request status Display range: Cancel request ON/Cancel request OFF | Cancel request ON: When Auto Start Stop cancel request is active Cancel request OFF: When Auto Start Stop is active | - |
| IGN | Ignition switch status (body integrated unit) Display range: ON/OFF | ON: IGN ON OFF: IGN OFF |
- |
| R/G Open SW | PRG opener switch status Display range: OFF/Tap/Press and hold |
OFF: When OFF Tap: When pressed shortly Press and hold: When pressed long |
- |
| Front Wheel Speed | Status of vehicle speed Display range: 0 - 229.5 km/h (0 - 142.6 MPH) |
Shows vehicle speed | - |
| Normal Keyless R/G SW | Status of normal keyless R/G button Display range: OFF/Tap/Press and hold | OFF: When OFF Tap: When pressed shortly Press and hold: When pressed long |
- |
| Smart Keyless R/G SW | Status of keyless access key R/G button Display range: OFF/Tap/Press and hold |
OFF: When OFF Tap: When pressed shortly Press and hold: When pressed long |
- |
| Idle Stop Control | Auto Start Stop control status Display range: During Auto Start Stop control/Other than during Auto Start Stop control | During Auto Start Stop control: The vehicle is under Auto Start Stop control Other than during Auto Start Stop control: The vehicle is not under Auto Start Stop control |
- |
| P range SW | Status of shift lever P Display range: ON/OFF | ON: P range OFF: Other than P range |
- |
| Parking Brake SW | Status of parking brake switch Display range: ON/OFF |
ON: When parking brake is ON OFF: When parking brake is OFF |
- |
| MT/AT | Vehicle information (body integrated unit) Display range: MT/AT | MT: MT model AT: AT model |
- |
| R/G Open Authorized State | Status of PRG permission Display range: Authorized state/Unauthorized state | Authorized state: PRG open permitted state Unauthorized state: PRG open not permitted state | - |
| Answer-Back Buzzer Information | Body integrated unit customizing information Display range: ON/OFF | ON: When buzzer is ON OFF: When buzzer is OFF |
- |
| TOUCH SENSOR | Touch sensor status | ON: Sensor is ON OFF: Sensor is OFF |
- |
| Rear Gate Target Speed | Rear gate target speed | Displays rear gate open/close target speed | - |
| Rear Gate Speed | Rear gate actual speed | Displays rear gate open/close speed | - |
| PRG MOTOR Duty | Rear gate motor DUTY output value | Displays rear gate motor DUTY output | - |
| Pulse-count 2 | Rear gate motor pulse count output | Displays rear gate position | - |
| Rear Gate Pos Init Flag | Rear gate position initialization status Display range: ON/OFF | ON: When pulse count is recognized (when initialization is finished) OFF: When pulse count is unknown | - |
| PRG State 2 | PRG status Display range: Full open/Suspending/Operating/Full close | Full open: Pulse count is at full open stop position or more Suspending: Pulse count is at full open stop position or less Operating: When PRG motor or closer motor is operating Full close: Full latch status |
- |