LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Power Steering System (Diagnostics) >> Data Monitor >> List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor: List

Item Content Standard/Unit Note
Power Supply Current Primary current recognized by power steering Control Module -128 - 127 A -
Vehicle Speed Vehicle speed 0 - 255 km/h -
Engine Speed Engine speed 0 - 12750 RPM -
CU Sensing Current (q) q axis current recognized by power steering Control Module -128 - 127 A -
Motor Current (U) U axis current recognized by power steering Control Module -128 - 127 A -
Motor Current (V) V axis current recognized by power steering Control Module -128 - 127 A -
Motor angular speed Motor rotational speed (RPM) -4096 - 4064 RPM -
ECM Temperature Power steering Control Module inner temperature -50 - 205°C -
Power Supply Voltage Voltage supplied to power steering Control Module 0 - 25.5 V -
Torque Sensor Power Supply Voltage supplied to torque sensor 0 - 10.2 V -
IG Voltage IGN voltage recognized by power steering Control Module 0 - 25.5 V -
CAN bus status CAN bus status Active/Passive/Bus Off -
EPS operating condition EPS assist status Normal/Assist Stop/Assist Restricted -
CU Target current (q) q axis indicator current from power steering Control Module to motor -128 - 127 A -
Assist Map Assist MAP specification used for control MAP1/MAP2/MA P3 -
Overheating protection intervention history Number of interventions to the overheat protection control 0 - 250 times -
IG Count after ECU Overheat Protection (latest) Number of times the ignition switch is ON at the last intervention to overheat protection control 0 - 65000 times -
IG Count after ECU Overheat Protection (Previous) Number of times the ignition switch is ON at the second last intervention to overheat protection control 0 - 65000 times -
IG Count after ECU Overheat Protection (Before Previous) Number of times the ignition switch is ON at the third last intervention to overheat protection control 0 - 65000 times -
Assist limited (Abnormal voltage) Number of the intervention of assist restriction control due to voltage failure 0 - 250 times -
IG OFF Number while Driving Number of times the ignition switch is turned OFF while driving 0 - 250 times -
Torque sensor main output Torque sensor (main) output value -15.36 - 15.24 N.m -
Torque sensor sub output Torque sensor (sub) output value -15.36 - 15.24 N.m -
Steering Angle Steering wheel rotational angle -640 - 640 deg -