Active Test: List
| Active test items | Contents | Execution condition |
|---|---|---|
| Fuel Pump Relay | ON/OFF of the fuel pump can be set. | Ignition switch ON (engine OFF) |
| CPC Solenoid Valve | ON/OFF of the purge control solenoid valve can be set. | |
| Radiator Fan Relay | ON/OFF of the radiator fan relay can be set. | |
| A/C Compressor Relay | ON/OFF of the A/C relay can be set. | |
| Evaporative Leak Control Module switching valve | ON/OFF of the leak check valve assembly switching valve can be set. | |
| Evaporative Leak Control Module pump | ON/OFF of the leak check valve assembly vacuum pump can be set. | |
| Fuel Pump Control (OFF Drive) | Fuel pump can be set to OFF. | Idling |
| Fixed Idle Ignition Timing | Idle ignition timing can be set. | Idling |
| Idle Speed Control | Idle speed can be set. | Idling |
| Injection Stop Mode (Injector 1) Injection Stop Mode (Injector 2) Injection Stop Mode (Injector 3) Injection Stop Mode (Injector 4) | Injector of each cylinder can be set to stop the fuel injection. | Idling |
| Injection Quantity Control | The amount of fuel injection can be set. | Idling |
| EGR Valve Control (Step) | STEP number of the EGR control valve can be set. | Idling |
| Alternator control | Alternator control mode can be set to one of the followings: Low mode Middle mode High mode ExHigh mode |
Idling |
| Active Grille Shutter Control* | Open →← close of the active grille shutter can be set. |
|
| Compression monitor | Compression can be measured. |
|
*: After replacing ECM or active grille shutter, be sure to perform this procedure.