Inspection Mode AE
| DTC | Item | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P04B5 | FUEL FILL DOOR STUCK OPEN | - | 2 |
WARNING:
When performing inspection mode AE on a public road, pay sufficient attention to the traffic condition and give the highest priority to safe driving.
NOTE:
- Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified.
- Do not refuel during the procedure from 3) to 5).
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Engine]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Drive for 15 minutes or more at a vehicle speed of 1.6 km/h (1 MPH).
Drive for 15 minutes or more at a vehicle speed of 1.6 km/h (1 MPH) or more.
NOTE: Vehicle stop time is not included. - Turn the ignition switch to OFF, and wait for 15 minutes or more.
- Turn to READY ON and wait for 10 seconds or more.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .