LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Crosstrek Hybrid >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (HEV) - Introduction >> Inspection Mode >> Procedure >> Inspection Mode AF
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Mode AF

DTC Item Condition Number of driving cycles on the detecting condition
P04B6 FUEL FILL DOOR STUCK CLOSED - 2
NOTE:
  • Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified.
  • As there is a procedure where 20 L (5.3 US gal, 4.4 Imp gal) or more of fuel is refilled, adjust to the fuel level that allows refueling.
  1. Make sure that the battery voltage is 12 V or more.
  2. Using the Subaru Select Monitor, perform the clear memory of [Engine]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
  3. Turn the ignition switch to ON.
  4. Turn the ignition switch to OFF.
  5. Refill 20 L (5.3 US gal, 4.4 Imp gal) or more of fuel.
  6. Turn to READY ON and wait for 10 seconds or more.
  7. Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .