LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Entry Control Module: Removal

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the rear seat cushion assembly. Refer to SEATS>REAR SEAT>REMOVAL .
  3. Remove the trim panel assembly apron LH and the trim panel rear pillar UPR LH. Refer to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>REMOVAL .
  4. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the keyless entry control module.
    G13226926Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals