LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Key Lock Cylinders >> Replacement >> Steering Lock
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Lock

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the immobilizer antenna assembly. Refer to SECURITY AND LOCKS>IMMOBILIZER ANTENNA>REMOVAL .
  3. Remove the screws, and remove the key interlock module.
    G13226914Courtesy of SUBARU OF AMERICA, INC.
  4. Replace the key lock assembly.
    1. Insert the key into the key lock assembly, and turn the key to the ACC position.
    2. Release the lock by inserting a flat tip screwdriver from the steering lock frame hole (A).
    3. Pull the key lock assembly until the key lock assembly claws touch the steering lock frame stopper (B).
      G13593318Courtesy of SUBARU OF AMERICA, INC.
    4. Insert a flat tip screwdriver from the steering lock frame hole (C), and release the claws to pull out the key lock assembly.
      G13593319Courtesy of SUBARU OF AMERICA, INC.
    5. Install the key lock assembly in the reverse order of removal.
  5. Install the key interlock module.
  6. Install the immobilizer antenna assembly. Refer to SECURITY AND LOCKS>IMMOBILIZER ANTENNA>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals