Power Seat And Remote Control Mirror Control Module (Only With Seat Position Memory)

1. Prior to starting work, check the following precautions. Refer to SEATS>GENERAL DESCRIPTION>CAUTION .
2. Raise the seat cushion by operating the switch.
3. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
4. Remove the Driver's seat from the vehicle. Refer to SEATS>FRONT SEAT>REMOVAL .
   NOTE: Move the front seat (Driver's seat) to the following positions.
   • Slide: rearmost end
   • Reclining: most upright
   • Lifter: downmost end
   • Tilt: downmost end
5. Remove the power seat & remote control mirror Control Module.
   1. Disconnect the connector.
   2. Remove the nuts and remove the power seat & remote control mirror Control Module.

Courtesy of SUBARU OF AMERICA, INC.