LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Installation >> Rear Seat Heater Control Module >> OUTBACK model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

OUTBACK model

  1. Install the rear seat heater Control Module.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  2. Install the trim panel assembly apron RH. Refer to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION>OUTBACK model .
  3. Install the pad rear side RH. Refer to SEATS>Rear Seat>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals