CVT Transaxle (Tr580) (Service Information): General Description: Specification

Transmission	Type				Forward continuously variable speed change, 1-reverse
	Gear ratio (including transfer reduction ratio)			Forward	4.066 - 0.503
				Rev	4.379
	Number of forward clutch plates		pcs.	Drive plate	3
				Driven plate	3
	Number of reverse brake plates		pcs.	Drive plate	4
				Driven plate	4
	CVTF capacity L (US qt, Imp qt)	With CVTF cooler (with warmer feature) + CVTF cooler (air cool)			11.44 - 11.94 (12.092 - 12.621, 10.068 - 10.508)
		CVTF cooler (with warmer feature)			11.02 - 11.52 (11.648 - 12.177, 9.699 - 10.139)
Torque converter	Type				Symmetric, 3-element, single stage, 2-phase
	Nominal			mm (in)	236 (9.3)
	Clutch				Sprag type one-way
	Stall torque ratio				2.18
	Stall speed (at sea level) r/min	D range			1, 950 - 2, 550
		R range			1, 850 - 2, 450
Oil pump	Type				2 port vane
	Driving method				Chain drive
Transfer	Type				Multi-plate
	Control method				Electronic hydraulic type
	Number of transfer clutch plates		pcs.	Drive plate	5
				Driven plate	5
	Gear ratio				1.000
Front differential	Type of gear				Hypoid gear
	LSD type				-
	Gear ratio			Sedan model	3.700
				OUTBACK model	3.900
	Backlash between the differential bevel gear and differential bevel pinion			mm (in)	0.13 - 0.18 (0.005 - 0.007)
	Hypoid gear set backlash			mm (in)
	Differential gear oil capacity			L (US qt, Imp qt)	1.22 - 1.30 (1.290 - 1.374, 1.074 - 1.144)

CVTF:

CAUTION: Always use specified CVTF. Using fluid other than specified CVTF will cause malfunction.

NOTE: In order to avoid improper filling of CVTF, the upper part of the filler plug hole is stamped with the mark of CVTF-3.

Differential gear oil:

For the differential gear oil, refer to RECOMMENDED MATERIALS>GREASE>CVTF . RECOMMENDED MATERIALS>GREASE>DIFFERENTIAL GEAR OIL .