LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Subaru
>>
2020
>>
WRX Base
>>
Repair and Diagnosis
>>
Brakes
>>
Traction Control
>>
Vehicle Dynamics Control (VDC) System (Diagnostics)
>>
Subaru Select Monitor
>>
Operation
>>
Maintenance Mode
July 1:
So it begins
. Don't worry, this is not in the correct legal jurisdiction!
Maintenance Mode
Display
Contents of display
Index No.
Brake Maintenance Mode
Used when inspecting and repairing parts related to rear brake.
Refer to
PARKING BRAKE>PARKING BRAKE SYSTEM>OPERATION>BRAKE MAINTENANCE MODE
.
Reading of parameter: ECM to SSM
Read VDC Control Module parameter data.
Refer to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER READING
.
Writing of parameter: SSM to ECM
Write the parameter data to the VDC Control Module.
Refer to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER WRITING
.
Select Parameter
Select and register parameters in the VDC Control Module.
Refer to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER SELECTION
.
Confirm on parameter
Parameters registered in the VDC Control Module are displayed.
Refer to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER CHECK
.