LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Inner Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Rear Gate Inner Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cap panel rear gate switch.
    1. Release the claws and pull out the cap panel rear gate switch rearward.
      G13626198Courtesy of SUBARU OF AMERICA, INC.
      NOTE: Insert flat tip screwdrivers wrapped with protective tape into the slits on both sides.
    2. Disconnect the connector and remove the cap panel rear gate switch.
  3. Release the claws and remove the power rear gate inner switch and the power rear gate lock switch.
    G13227257Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals