Operation Procedure B

NOTE: With [Write ECU setting 12 columns of models], carry-over of odometer value cannot be performed.

Replace the combination meter assembly with a new part. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter .
Write the vehicle data.
1. Connect the Subaru Select Monitor and then turn the ignition switch to ON.
2. On [Start] screen, select [Diagnosis].
3. On [Vehicle selection] screen, enter vehicle information and select [OK].
4. On [Main Menu] screen, select [Each System].
5. On [Select System] screen, select [Combination Meter], and then select [Next].
6. On [Select Function] screen, select [Work Support], and then select [Reading and Writing of the ECU Configuration Information and Odometer Value].
7. From the item list, select [Write ECU setting 12 columns of models]. Enter the applied model and click the [OK] button. Ref. to IDENTIFICATION>IDENTIFICATION NUMBER & LABEL LOCATIONS .
8. Enter the option code (4 digits) and click the [OK] button. Ref. to IDENTIFICATION NUMBER & LABEL LOCATIONS .
9. Confirm the vehicle information on [Write ECU setting 12 columns of models] screen, and click the [OK] button.
10. When [Write?] is displayed, select the [Yes] button.
11. Confirm that [Write operation is complete.] is displayed, and click the [OK] button.
Check if the combination meter assembly operates normally.