LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Combination Meter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Meter: Installation

CAUTION:
  • Make sure the electrical connector is connected securely.
  • Make sure that each meter operates normally.
  • For the model without keyless access with push button start except for C0 model, when the combination meter assembly is replaced, perform the registration of immobilizer system. For detailed operation procedure, refer to "Type B" described in "REGISTRATION MANUAL FOR IMMOBILIZER".
  • When the combination meter assembly is replaced, perform the variant work. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter System>OPERATION>VARIANT WORK .
  1. Install the combination meter assembly.
  2. Connect the connector, and install the visor assembly.
  3. Install the cover visor.
  4. Install the cover LWR driver.
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals