Front Impact Sensor

Before installation, inspect the following items and replace any faulty part with a new part.
- Front impact sensor is free from damage.
- Connector is free from damage.
Install the front impact sensor.
CAUTION:
- Do not reuse the bolt and nut.
  Always replace with the specified new bolts and nuts.
- When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely.
Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)
Install the air intake duct. (RH side only)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .