6MT Model
- Check for smooth operation to each position. Especially, shift to 5th ↔ 6th and to Rev, and check for any stuck.
- Check the slider returns to the original position by shifting to the Rev and then back in neutral while pulling up the slider.
- If the shifting operation is not smooth, readjust the exposed length (a) of MT gear select cable by referring to the following figure.
- If 5th or 6th gear cannot be selected (pressing to the reverse lock bracket):
→ Extend the exposed length (a) of MT gear select cable.
- If the select lever cannot be operated along the cranking line when operating the lever from 4th to 5th:
→ Shorten the exposed length (a) of MT gear select cable.
- If 5th or 6th gear cannot be selected (pressing to the reverse lock bracket):