Power Rear Gate System: General Description: Caution

When performing service operation, refer to "Repair Contents" in "General Description". Ref. to REPAIR CONTENTS>REPAIR CONTENTS .
Before disconnecting connectors of sensors or units, be sure to disconnect the ground terminal from the battery sensor. When replacing the electrical parts provided with memory functions that can store contents specified by a customer, record the memory contents before disconnecting the ground terminal from the battery sensor.
After reassembly, close the rear gate and then connect the ground terminal to the battery sensor. Initialization of the power rear gate auto closer is necessary, when connection is performed with the rear gate open. Ref. to POWER REAR GATE SYSTEM>Power Rear Gate System>PROCEDURE>INITIALIZATION .