Inspection Mode 1

Diagnostic procedure:

1. Using the Subaru Select Monitor, perform the clear memory of [Keyless Entry]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
2. Using the Subaru Select Monitor, read the DTC of [Keyless Entry] to check that there is no DTC displayed. Ref. to KEYLESS ENTRY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
3. Remove the ignition key from the ignition switch, and insert again.
4. Turn the ignition switch OFF - ON, and wait for 10 seconds or more.
5. Using the Subaru Select Monitor, read the DTC of [Keyless Entry] to check that there is no DTC displayed. Ref. to KEYLESS ENTRY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.