Check Motor Operation

MODEL WITHOUT SEAT POSITION MEMORY 

1. Apply battery voltage between the outer mirror connector terminals and check the mirror operation.

   Courtesy of SUBARU OF AMERICA, INC.

   Terminal No.	Inspection conditions	Switch position
   -	-	OFF
   13 (+) - 12 (-)	Apply battery voltage between terminals.	UP
   12 (+) - 13 (-)	Apply battery voltage between terminals.	DOWN
   11 (+) - 13 (-)	Apply battery voltage between terminals.	LEFT
   13 (+) - 11 (-)	Apply battery voltage between terminals.	RIGHT

2. If it does not operate normally, replace the outer mirror assembly.

MODEL WITH SEAT POSITION MEMORY 

For inspection of outer mirror, refer to "POWER SEAT MEMORY (DIAGNOSTICS)" service information. Ref. to POWER SEAT MEMORY (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .