Inspection Mode 5
| DTC | Description and trouble part | Note |
|---|---|---|
| B1015 | KEY INTERLOCK CIRCUIT | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Body Control]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to Body Control (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Turn the ignition switch to ON, shift the shift lever in other than P range, and wait for 10 seconds or more.
- Repeat the step 3) three or more times.
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to Body Control (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.