Inspection Mode 2
| DTC | Description and trouble part | Note |
|---|---|---|
| B2A04 | MIC CIRCUIT | Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC B2A04: MIC CIRCUIT . |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Telematics]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Telematics] to check that there is no DTC displayed. Ref. to Telematics System (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Turn the ignition switch to OFF.
- Turn the ignition switch to ON.
- Turn the MIC power supply to ON, and wait for 5 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Telematics] to check that there is no DTC displayed. Ref. to Telematics System (Diagnostics)>Diagnostic Trouble Code (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.