Inspection Mode 1
| DTC | Description and trouble part | Note |
|---|---|---|
| B2602 | Vehicle Speed Control | - |
| B2603 | EPB Control | - |
| B2604 | Power Seat Memory EEPROM | - |
| B2605 | Battery Control Low | - |
| B2609 | IG | - |
| B260A | ACC | - |
| B260C | CONTROL MODULE COMMUNICATION STUCK | - |
| B2620 | ELECTRIC FOLDING MIRROR SW ANOMALOUS STATE | - |
| B2621 | MIRROR SW ANOMALOUS STATE | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Door Mirror (Driver)] or [Door Mirror (Passenger)]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Read the DTC of [Door Mirror (Driver)] or [Door Mirror (Passenger)] using Subaru Select Monitor and check that the DTC is not displayed. Ref. to Door Mirror (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Turn the ignition switch ON → OFF.
- Turn the ignition switch OFF → ON, and wait for 30 seconds or more.
- Read the DTC of [Door Mirror (Driver)] or [Door Mirror (Passenger)] using Subaru Select Monitor and check that the DTC is not displayed. Ref. to Door Mirror (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.