Forced Drive
CAUTION:
- After a forced operation, make sure to perform an initialize operation. Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>SUNROOF CONTROL SYSTEM>OPERATION>INITIALIZATION .
- For removal and installation of the cover assembly stereo camera, refer to "REMOVAL" and "INSTALLATION" of "Stereo Camera" in the "EyeSight" article and observe the precautions. Ref. to EYESIGHT>STEREO CAMERA .
NOTE:
If the glass lid does not operate or the sunroof motor is not supplied with power, remove the sunroof motor and move the glass lid manually.
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the cover assembly stereo camera. Ref. to EYESIGHT>STEREO CAMERA>REMOVAL .
- Remove the motor assembly. Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>SUNROOF MOTOR>REMOVAL .
- Move the lid assembly manually.
- Install the motor assembly. Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>SUNROOF MOTOR>INSTALLATION .
- Install the cover assembly stereo camera. Ref. to EYESIGHT>STEREO CAMERA>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .