LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Ventilation System >> Installation >> Seat Ventilation Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Ventilation Control Module

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Use a hand riveter to install the seat ventilation control module.
    CAUTION: Set the height of rivet crimped section as 3 mm (0.12 in). If the crimp is not sufficient, press them with pliers, etc. in order to avoid interfering with the door trim.
  2. Assemble the front seat (passenger's seat). Ref. to SEATS>FRONT SEAT>ASSEMBLY .
  3. Install the front seat (passenger's seat). Ref. to SEATS>FRONT SEAT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  5. Perform [Rezeroing] for the occupant detection system. Ref. to AIRBAG (DIAGNOSTICS)>REZERO .
  6. Perform "Occupant Detection System Inspection" to check if the occupant detection system operates normally. Ref. to PRE-DELIVERY INSPECTION>PRE-DELIVERY INSPECTION (PDI) PROCEDURE>SEAT .
  7. For model with door mirror interlocked seat position memory, initialize the seat position memory control module. Ref. to SEATS>POWER SEAT SYSTEM>ADJUSTMENT .
scientia non olet · About LEMON Manuals