LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (CVT Transaxle System (Tr690)) >> Transmission Control Device >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Device: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the parking pawl. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>PARKING PAWL>REMOVAL .
  2. Remove the inhibitor switch. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>INHIBITOR SWITCH>REMOVAL .
  3. Remove the oil pan. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>OIL PAN>REMOVAL .
  4. Remove the spring pin.
    NOTE: Be careful not to drop the spring pin in the transmission.
    G13951315Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the detent spring.
    G13951316Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the shifter arm shaft.
    G13951317Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the manual plate (A) and parking rod (B) as a single unit.
    G13951318Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the parking rod from the manual plate.
  9. Remove the oil seal using a flat tip screwdriver wrapped with protection tape.
G13951319Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals