Inspection Mode 1
| DTC | Description and trouble part | Note |
|---|---|---|
| B1010 | BODY CONTROL SYSTEM (BIU) MALFUNCTION | - |
| B1011 | BATTERY CONTROL POWER SUPPLY | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Body Control]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to Body Control (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Disconnect the ground terminal from the battery sensor, reconnect it, and then wait for one minute or more.
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to Body Control (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.