April 5, 2026: LEMON Manuals is launched! Read the announcement.

Registration Of Keyless Transmitter With SUBARU Select Monitor

NOTE:

A maximum of four keyless transmitters can be registered for each individual vehicle.
When replacing or adding the keyless transmitter, new registration of transmitter is necessary.

Register the transmitter.
1. Connect the Subaru Select Monitor to data link connector.
  NOTE: For detailed operation procedures, refer to "Application help".
2. Turn the ignition switch to ON.
3. On «Start» display, select «Diagnosis».
4. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
5. On «Main Menu» display, select «Each System».
6. On «Select System» display, select «Body Control» and then select «Enter».
7. On «Select Function» display, select «Work Support».
8. On «Work Support» display, select «Keyless ID registrations
9. According to the directions on the screen, press the button of the transmitter to be registered in order of Lock - Unlock. (When registration completed: Outside buzzer sounds once.)
  NOTE:
  - Repeat the procedure as many times as the number of transmitters to be registered.
  - When attempting to register a key that has already been registered, the external buzzer sounds twice.
10. Press the [Exit] button to finish the operations.