LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (General Information & Specifications) >> Repair Contents >> Note >> Setting Operation For Parts Replacement, Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Setting Operation For Parts Replacement, Removal/Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Operation list

Main replacement part/operation Necessary operation Phenomenon when not performed/disabled function Reference
  • TCM
  • Transmission body
  • Control valve body
  1. Clear AT learning value
  2. AT learning mode
  3. Module registration (when TCM is replaced)
  • Abrupt engine increase
  • Excessive shift shock
 Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>AT LEARNING>PROCEDURE
Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION
  • VDC control module and hydraulic control unit (VDC CONTROL MODULE & H/U)
  • Steering angle sensor
  • Column assembly steering
  • Steering gearbox assembly
  • Steering wheel
  • Universal joint assembly steering
  • Wheel alignment adjustment
  • For other parts replacement, refer to the operation and adjustment procedures for each item.
  1. VDC sensor midpoint setting
  2. Parameter selection and registration (when replacing VDC CONTROL MODULE & H/U)
  3. Lane keep assist learning value clear (when adjusting wheel alignment)
  4. Module registration
  • VDC system does not operate normally (Warning light illuminates)
  • Steering warning light
  • EPS control
  • Difference of steering effort between right and left
  • EyeSight does not operate normally
 Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>ADJUSTMENT>VDC SENSOR MIDPOINT SETTING MODE
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>MAINTENANCE MODE
Ref. to EYESIGHT (DIAGNOSTICS)>WORK SUPPORT
Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION>OPERATION
  • Auto headlight beam leveler control module
  1. Auto headlight beam leveler system initialization/reinitialization
  • AUTO HEADLIGHT BEAM LEVELER SYSTEM
 Ref. to LIGHTING SYSTEM>AUTO HEADLIGHT BEAM LEVELER SYSTEM>PROCEDURE
  • Regulator & motor assembly front (RH, LH)
  • Regulator & motor assembly rear (RH, LH)
  • Glass assembly front door (RH, LH), glass assembly rear door (RH, LH), sash assembly partition (RH, LH), sash assembly front door LWR (RH, LH) or sash assembly rear door partition
  • Running channel front door (RH, LH)
  • Running channel rear door (RH, LH)
  1. Power window system initialization
  • Door glass automatic open/close function
  • Auto-reverse function
  • Operation after key OFF (ignition switch OFF)
  • Remote control of seats with driver's seat switch
 Ref. to GLASS/WINDOWS/MIRRORS>POWER WINDOW SYSTEM>OPERATION
  • Body integrated unit
  1. Customize
  • Poor operation of each function
 Ref. to BODY CONTROL (DIAGNOSTICS)>CUSTOMIZE
  • Combination meter
  1. Variant work
  • Poor operation of each function
 Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER>REPLACEMENT>VARIANT WORK
  • Stereo camera
  1. Camera adjustment and inspection
  2. Module registration
  • EyeSight does not operate normally
 Ref. to EYESIGHT>CAMERA ADJUSTMENT, INSPECTION>PROCEDURE
Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION>OPERATION
  • Windshield glass
  1. Camera adjustment and inspection
  • EyeSight does not operate normally
 Ref. to EYESIGHT>CAMERA ADJUSTMENT, INSPECTION>PROCEDURE
  • Lens hood
  1. Heater heating and cooling fan drive test
  • EyeSight does not operate normally
 Ref. to EYESIGHT>LENS HOOD>INSPECTION>HEATER HEATING AND COOLING FAN DRIVE TEST
  • Data communication module (DCM)
  1. Server registration (Comm Check)
  2. Immobilizer system registration
  • Poor operation of each function
 Ref. to ENTERTAINMENT & MONITORING>TELEMATICS SYSTEM>OPERATION>REGISTRATION (COMM CHECK)
  • Motor assembly
  • Lid assembly
  1. Initialize operation
  • Poor operation of each function
 Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>SUNROOF CONTROL SYSTEM>OPERATION
  • Electric brake booster
  • Engine control module (ECM)
  • Central gateway control module
  1. Module registration
  • Poor operation of each function
 Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION>OPERATION
  • Passenger's seat
  • Airbag control module
  1. Occupant detection system [Sensor rezero adjustment]
  • Poor operation of each function
 Ref. to AIRBAG (DIAGNOSTICS)>REZERO
  • Steering roll connector removing/installing
  1. Alignment of steering roll connector center neutral position (when reused)
  • Poor operation of each function
 Ref. to AIRBAG SYSTEM>ROLL CONNECTOR>ADJUSTMENT
NOTE:

For settings or other procedures for immobilizer related part, refer to "REGISTRATION MANUAL FOR IMMOBILIZER". 

scientia non olet · About LEMON Manuals