Section 2 (Eyesight System): General Description: Caution

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

When performing service operation, refer to "Repair Contents" in "General Description". Ref. to REPAIR CONTENTS>REPAIR CONTENTS
When performing work on the sensors or modules, be careful of the following.
- Before disconnecting connectors, be sure to disconnect the ground terminal from the battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
- Do not apply any impact. If the parts are accidentally dropped, replace with a new part.
- Do not expose to high-temperature and humidity.
When replacing the parts provided with memory functions, record the memory contents before disconnecting the ground terminal from the battery sensor.
Refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
For precautions for the EyeSight, refer to "CAUTION" of "EyeSight (DIAGNOSTICS)". Ref. to EYESIGHT (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION
Be careful of handling the cover EyeSight and the stereo camera, and use special care during the work.
Do not change the installation position of the stereo camera, or do not modify the cover EyeSight and the camera bracket.
If the damage is found in the glass repair prohibited area, always replace the glass. Damage, dirt, aftermarket part installation or sticker attachment in the prohibited area can affect the recognition of stereo camera, and thereby the EyeSight function may not operate properly. Ref. to CAUTION>CHECK WINDSHIELD GLASS INCLUDING PROHIBITED AREA FOR MODEL WITH EyeSight