Fuel Pump Control Unit: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel pump control module, and connect the connector.
Tightening torque:
5 N.m (0.5 kgf-m, 3.7 ft-lb)
- Install the trim panel trunk side RH. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY