LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Front Suspension And Wheel Alignment) >> Front Strut >> Removal >> Standard Damper Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Standard Damper Model

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>REMOVAL .
  2. Remove the nut and disconnect the stabilizer link front (upper part).
    G14601756Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolt and then remove the brake hose bracket.
    G14601757Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the bolt and harness clip, and remove the sensor sub assembly front.
    G14601758Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the strut assembly.
    1. Place an alignment mark (a) on the adjusting bolt and the strut assembly.
    2. Remove the adjusting bolts and flange bolts for the strut assembly.
      CAUTION:

      Turn and remove the nut while holding the bolt side. 

      G14601759Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the nuts, and remove the strut assembly.
    G14601760Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals