Stabilizer Link

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

For parts which are not reusable, always use new parts.

Before installation, check the stabilizer link front for damage.
Using a new flange nut, install the stabilizer link front.
CAUTION:
Be careful not to damage the boot of the ball joint.

Tightening torque:

60 N.m (6.1 kgf-m, 44.3 ft-lb)
Install the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>INSTALLATION .