Suspension Control Module: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .

Install the damper control module.
1. Install the damper control module to the bracket damper control module.
2. Connect the connector to the damper control module.
3. Install the bracket damper control module.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the front seat LH. Ref. to SEATS>Front Seat>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .