Trailing Link: Assembly
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Before assembly, inspect the following items and replace any faulty part with a new one.
- Check trailing link assembly rear for damage and deformation.
- Check the bushing for abnormal cracks, damage or fatigue.
- Press-fit the rubber bushing trailing link using STI and ST2.CAUTION:
Make sure to press the bushing straight in.
Preparation tool:
ST1: BUSHING REMOVER (20099FG000)
ST2: INSTALLER & REMOVER (20099PA010)