LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Instrumentation System (Diagnostics)) >> Data Monitor >> List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor: List

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
Item Contents Standard/Unit Note
IG on trip number Time stamp information Time -
IG on supply system Time stamp information - -
past time after IG on Time stamp information ms -
+B voltage Battery voltage value 0 - 25 V -
IGN voltage Ignition power supply voltage value 0 - 25 V -
vehicle speed Vehicle speed value detected by meter 0 - 360.0 km/h -
Engine speed Engine speed value detected by meter 0 - 16383 rpm -
Engine coolant water temperature Engine coolant temperature detected by meter -40 - 214°C -
Fuel level resistance [ohm] Fuel sensor value display 0 - 511.5 ohm -
Fuel residual quantity indication value [L] Remaining fuel quantity value display 0 - 80 L -
Ambient air temperature External temperature sensor value display -40 - 80°C -
External air temperature indication value Correction value for displaying ambient temperature -40 - 80°C -
Driver side seat belt state Driver's seat belt fastened status Driver's seat belt seated status
Driver's seat belt not fastened status
-
Passenger side seat belt state Passenger's seat belt fastened status Passenger's seat belt seated status
Passenger's seat belt not fastened status
-
Rear side (right) seat belt state Rear right seat belt fastened status Rear right seat belt seated status
Rear right seat belt not fastened status
-
Rear side (center) seatbelt state Rear center seat belt fastened status Rear center seat belt seated status
Rear center seat belt not fastened status
-
Rear side (left) seat belt state Rear left seat belt fastened status Rear left seat belt seated status
Rear left seat belt not fastened status
-
ODO/TRIP switch input state Input condition of ODO/TRIP switch is displayed Switch OFF status
Switch ON status
-
TFT display reshuffling switch input state Input condition of TFT display change switch is displayed Switch OFF status

Shift Up Switch ON status

Shift Down Switch ON status

i/SET Switch ON status


Input indefinite status
-
Illumination control switch input state Input condition of illumination control switch is displayed 0 - 100 % -
Bright switch input state Input condition of bright switch is displayed Bright OFF status
Bright ON status
-
Si-DRIVE switch input state Input condition of SI-DRIVE switch is displayed Switch OFF status

[S/I] Switch input

[S#/I] Switch input

[I] Switch input

[S] Switch input


[S#] Switch input
-