Reverse Automatic Braking Control Module: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the sonar control module assembly, and then connect the connector.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the trunk trim panel side. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY