Inspection Mode 2
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Description & trouble part | Note |
|---|---|---|
| B2A05 | LEFT SPEAKER/AUDIO CIRCUIT | Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B2A05 LEFT SPEAKER/AUDIO CIRCUIT |
| B2A06 | RIGHT SPEAKER/AUDIO CIRCUIT | Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B2A06 RIGHT SPEAKER/AUDIO CIRCUIT |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Telematics]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
- Using the Subaru Select Monitor, read the DTC of [Telematics] to check that there is no DTC displayed. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1 .
- After turning the ignition switch to OFF, open/close the door, and wait for 5 minutes or more before turning the ignition switch to ON.
- Turn the ignition switch to ON, and wait for 120 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Telematics] to check that there is no DTC displayed. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.