License Plate Light: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
- Install the license plate light bulb.
- Connect the connector, and install the license plate light assembly.
- Install the garnish assembly trunk. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK LID GARNISH>INSTALLATION
- Install the trim panel trunk lid. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY