Trunk Room Light: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Do not remove the trunk room light if removing the bulb only.

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY

Remove the light assembly trunk room.

Release the claws.

Disconnect the connector and remove the light assembly trunk room.

Courtesy of SUBARU OF AMERICA, INC.

Release the claws to open the bulb cover, then remove the bulb.
CAUTION:
Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
NOTE:
- Perform this procedure only when required.
- When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.
Courtesy of SUBARU OF AMERICA, INC.