Section 10 (M/T Clutch System): General Description: Specification
WARNING: This page is about a different variant/trim than selected.
| Model | STI | Except for STI | ||
| Transmission type | 6MT | |||
| Clutch cover | Type | Pull type | Push type | |
| Diaphragm set load N (kgf, lbf) | 9120 (930, 2051) | 8400 (857, 1889) | ||
| Clutch disc | Facing material | Woven (non-asbestos) | ||
| O.D. x I.D. x Thickness mm (in) | Clutch cover side | 240 x 160 x 3.5 (9.45 x 6.30 x 0.138) | ||
| Flywheel side | 240 x 160 x 3.2 (9.45 x 6.30 x 0.126) | |||
| Spline outer diameter mm (in) | 25.2 (0.992), (number of teeth: 24) | |||
| Depth of rivet head mm (in) | Clutch cover side | 1.65 - 2.25 (0.065 - 0.089) | ||
| Flywheel side | 1.35 - 1.95 (0.053 - 0.077) | |||
| Limit of sinking | 0.8 (0.031) | |||
| Deflection limit mm (in) | 0.7 (0.028) at R = 115 (4.53) | |||
| Clutch release lever ratio | 1.7 | 1.6 | ||
| Release bearing | Grease-packed self-aligning | |||
| Clutch pedal | Full stroke mm (in) | 130 - 135 (5.12 - 5.31) | 135 - 140 (5.31 - 5.51) | |
| Free play mm (in) | 4 - 11 (0.16 - 0.43) | |||
| Flywheel | Type | Conventional | Flexible | |