Intermediate Case: Assembly
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Install the reverse brake. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Reverse Brake>ASSEMBLY .
- Install the plug to the intermediate case with a new O-ring.CAUTION:
- Before installing O-rings, apply sufficient amount of CVTF to avoid damage and deformation.
- Use SUBARU genuine CVTF.
- Be careful not to incorrectly install or fail to install O-rings and other such parts.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the parking support.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Temporarily install the filler plug.NOTE: Replace the filler plug gasket with a new part after adjusting CVTF fluid.