LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (CVT Transaxle System) >> Transmission Control Device >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Device: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the detent spring.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb)

  2. Install the manual plate, parking rod, shifter arm shaft and bolt.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb)

  3. Install a new spring pin.
  4. Install the inhibitor switch. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Inhibitor Switch>INSTALLATION .
  5. Adjust the inhibitor switch. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Inhibitor Switch>ADJUSTMENT .
  6. Install the control valve body and oil pan. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Control Valve Body>INSTALLATION .
  7. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Transmission Assembly>INSTALLATION .
scientia non olet · About LEMON Manuals