Auto Headlight Beam Leveler Control Module: Installation
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Install the auto headlight beam leveler control module.
Tightening torque:
7.5 N.m (0.8 kgf.m, 5.5 ft.lb)
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Perform initialization and reinitialization of the auto headlight beam leveler system, Ref. to LIGHTING SYSTEM>Auto Headlight Beam Leveler System>PROCEDURE .